Port Charlotte Molds reproduce by launching very tiny mold spores into the air

Port Charlotte Molds reproduce by launching very tiny mold spores (seeds) into the air. Port Charlotte Mold spores can be as small as .05 microns and they are very aerodynamic. Normal

breezes and air movement keep spore in the air for long periods of time. But… when the Port Charlotte mold spores land on a damp spot or wet material indoors they may begin to grow. Southwest

Florida Mold’s favorite foods are wood and paper. Our home have lots of wood, in structural, furnishings and trim materials; and paper as the covering on drywall and wall paper. So when Southwest

Florida mold begins to grow on wood product surfaces in our homes it is literally eating and digesting these materials.

When moisture or high humidity exists in a home, particularly if the problem is undiscovered or not addressed, Port Charlotte mold growth can occur.

There is no practical way to keep Port Charlotte mold spores from entering your home. Every time you open a door or window spores blow in to your home. The only way to prevent and control

Central Florida mold growth from occurring in your indoor environment is to control the humidity in your indoor air.

The process of cooling your home with an air conditioning unit will normally keep the humidity in your home below 55%. Also air movement from the A/C unit and ceiling fans will help to discourage

Port Charlotte mold spores from landing and will create evaporation of surface moisture. You can also keep moisture out of your home by caulking any cracks and places where moist outside air

might leak inside and bring higher humidity and condensation. Keep you’re A/C evaporator drain line clear to prevent drain pan leaks on your ceilings. Have you’re A/C technician check your supply

ducts, especially flex duct, for small air leaks. This cool air will cause condensation when it contacts the warm moist air in your attic space. This may cause moisture to wet the back of your

ceiling drywall. Replace worn sweeps on exterior doors to prevent warm moist air from entering. Inspect the weep holes in your windows to insure that rain water can drain to the outside. Insulate

any piping exposed to the inside environment (toilets and under sinks) to prevent condensation. Be sure your dryer and bath exhaust fans are vented to the outside. Not to the attic space.

Warning: include(/home/h2o911/PORTCHARLOTTEMOLDREMEDIATION.COM/wordpress/wp-content/themes/twentyeleven/inline-news.php) [function.include]: failed to open stream: No such file or directory in /home/h2o911/PORTCHARLOTTEMOLDREMEDIATION.COM/wordpress/wp-content/plugins/exec-php/includes/runtime.php(42) : eval()’d code on line 35

Warning: include() [function.include]: Failed opening ‘/home/h2o911/PORTCHARLOTTEMOLDREMEDIATION.COM/wordpress/wp-content/themes/twentyeleven/inline-news.php’ for inclusion (include_path=’.:/usr/local/lib/php:/usr/local/php5/lib/pear’) in /home/h2o911/PORTCHARLOTTEMOLDREMEDIATION.COM/wordpress/wp-content/plugins/exec-php/includes/runtime.php(42) : eval()’d code on line 35

People often report condensation on the inside of their windows in the winter. When you see this condensation occur wipe the moisture with a towel. Remember that when we have to use the heater

capacity of or A/C system the system is not dehumidifying the indoor air. During these times we either should run our A/C unit or provide another source of dehumidification. A room dehumidifier

will help and running ceiling fans will also provide evaporation. These moisture control measures will help you prevent Port Charlotte mold growth in your home.

If you do see Port Charlotte mold growth in your home call a local Indoor Air Quality Association (IAQA) certified Port Charlotte Mold remediation and Water Damage contractor. The IAQA and

IICRC guidelines for mold removal and cleaning are technical and specific. The designation CMR Certified Port Charlotte Mold Remediator and CMI Certified Port Charlotte Mold Inspector are the

sign of a professional and qualified Port Charlotte Mold remediation and Water restoration Company. All Port Charlotte mold removal and cleaning should be performed in a contained area under

a negative pressure to protect the health and safety of your home and family health.

The logical last step to insure a Port Charlotte mold remediation and cleaning has been effective is an air clearance of your indoor air quality by a CIE (Certified Indoor Environmentalist).

This test will definitively tell if there is a source of Port Charlotte mold spores inside your home. This test is also a useful documentation of a complete and effective remediation of a

Port Charlotte mold problem.